PDA

View Full Version : need a stanley parts website



eric mall
04-28-2009, 8:31 PM
i need a good website for plane parts. i just picked up a stanley #7 for 5 bucks and the only thing missing is the tote bolts. great condition and just needed a good sharpening.

Casey Gooding
04-28-2009, 9:08 PM
http://antique-used-tools.com/index.html
This one's good. Parts are reasonable....full planes are a bit over the top for my taste.

Tom Veatch
04-28-2009, 10:45 PM
Stanley also has parts for their planes (USA and English)

http://www.stanleytoolparts.com/number7usa.html

Jim Koepke
04-28-2009, 11:36 PM
The front screw on the tote is a #12-20. This is the same size and thread as the screws holding the frog in place. The frog screws are a lot less expensive. They have flat/squared heads. When I needed one a few years ago, a file was taken to the head of a frog screw. Now it might take a minute or two to find which plane has the "funny" screw. I think there is now a correct replacement screw in my stash, just haven't bothered to change it out.

jim

Eric Brown
04-29-2009, 7:25 AM
http://www.stjamesbaytoolco.com/

They have what you need and then some.

Eric