PDA

View Full Version : SCMS/CMS table depth



Damon Marxer
12-24-2009, 10:21 AM
I am in the process of building a table and dust collection system for my 12" CMS. I would like to eventually upgrade to a 10" SCMS and was curious how wide everyone made their tables for their SCMS. I know the SCMS will take up more room but I am just not sure how much more. Would I be ok with a 24" table depth or would I need to go 30". I also would rather keep it to 24", or as close as possible, for space. Seen a lot of pictures on the forum but I am not good at visual measurements. :o

Thanks for any input.

Damon

Jeff Nolan
12-24-2009, 10:30 AM
I have 30" for my Makita LS1013 (this mounts the saw and gives you enough space to clear the saw on a full swing).

Here's my setup.

http://farm3.static.flickr.com/2519/4210537591_d9d63984b8.jpg