View Full Version : Powermatic 60 Jointer
11-09-2007, 10:45 AM
I am looking for feedback on a Powermatic 60 jointer. This would be the model with the long adjustment handle on the infeed table. I did notice that the table is about 10" shorter than the current Powermatic 60 jointer. Is it a good jointer?
I found the picture below on the internet.
11-09-2007, 11:38 AM
I have a model 60 that I bought 3 yrs ago ... I brought it home cleaned it up and ajusted the tables and put a set of cabide 8" blades in it and it ROCKs!!!! ;)
11-09-2007, 12:46 PM
The jointer is being delivered Saturday if all goes as planned.
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.