PDA

View Full Version : Experienced on ULS Industrial Series


Michael Lang
06-09-2008, 8:10 AM
Has anybody any experience on or is user of ULS Instustrial Series (60W)?

would appreciate any info.

thank you.
Mike Mackenzie
06-09-2008, 12:31 PM
Michael,

What are you needing?
Kevin L. Waldron
06-09-2008, 7:52 PM
I have a ULS12.150D with twin 60 tubes. I have only had this machine for approximately 30 days. Company is making every effort to get things right technical has been superb. Problem is down to software interface not performing as required. Contact me offsite if additional information is needed.
Michael Lang
06-11-2008, 1:23 AM
thank you so far. i'm interested in the cutting quality vs. engraving quality. the feature of the passthrough is also interesting.

i have a demo scheduled and want to preper myself.

are there any special thing i have to ask or be aware of?

are there any negative sides of the system?
Kevin L. Waldron
06-11-2008, 10:26 AM
Michael,

I would rather tell you over the phone.

Thanks,

Kevin
615-969-7695
Brian Robison
06-11-2008, 10:40 AM
Kevin,
Let me know when it's a good time to visit you. I'd like to run over there.

Brian