PDA

View Full Version : ULS X100 firmware needed........



jon catton
06-22-2008, 1:33 PM
Hi All,
Thanks again to all who have contributed to my saga so far re the ULS x100.

I want to try and update the firmware - does anyone have a recent copy suitable - plus instructions ?

Much appreciated - it is however seemingly pointing to the coherent laser being shot - it seems to be getting a signal to fire and the modulated signal - the display / machine seems to think all is well - just no ouptut.......

I want to try EVERYTHING though before I spend big cash on getting coherent themselves to try to breathe new life into it.

For what it's worth I took a look inside the laser cartridge - Diamond G-100 at the rf circuits (I assume) - no nasties visible.........

I hope I get to the bottom of it before too long - I haven't got much hair left to keep pulling out !:confused:

Regards to all,

Jon Catton:)

Mike Mackenzie
06-23-2008, 2:46 PM
Jon,

send me a pm with your e-mail address and I will send you the firmware.