PDA

View Full Version : Epilog center to center trick



Brian Robison
06-27-2008, 1:22 PM
Hi Creekers,
Ya'll are so savvy you probably already figured this out, but I'm not as smart as you!:rolleyes:
I like the center to center feature but once you shut off the laser you lose the setting. I figured out that if you disable the X and Y and move the red dot over the center of the piece your engraving, the control panel tells you your location (sort of). I move my text / logo by boxing it to the location where the laser X and Y said the center of the engraving area is and Viola. It's now repeatable after you turn off the laser by not using the center to center feature.