Recently i was setting up my incra 2000 miter gauge to cut some small pieces(one inch) at the widest on 15 degree ...when i notice my fingers weren't all that comfortable with the distance to the blade. after 70 plus years i've become accustom to the balance of 10 fingers ..does anyone have any suggestions for a hold down for this Incra Bill
Steve, We have a Epilog 45 watt mini and 3 Melco Amaya embroidery machines. If you look at the photos, and if I were to embroider that design the number of stitches would run the cost up to around $100 for the sweatshirt, plus it takes alot of time to stitch out a large design. (remember how thin a thread is) Now if I use the twill instead of stitching, the same sweatshirt will run around $40.00. The Sports Twill comes in PSA and PSA PERM. The PSA would be used if I wanted ...
Worthless Dribble: Here in the northwoods of Wisconsin XC ski trails are starting to get soft, the birkebeiner has concluded, roads are still too icy to bike, and our dictator (err governor) has managed to divide a pretty easy going population. Perhaps it explains the highest concentration of taverns per capita in the US. http://www.flickr.com/photos/littleg...gy/5456929648/ Might as well use the time between seasons to get cracking on the major project for 2011. ...
Originally Posted by Scott Hubl Well I finished up my turning tool rack. "The Rocket Launcher II" I still have some arranging to do and I may add some things or remove them but for the most part I have Completed my Turning Tool Organization Project. I give you - The Rocket Launcher II, Turning Tool Rack. Overall Shot Closer Shot ...
Originally Posted by Scott Hubl Project- Rocket Launcher II Searching threads I recently came across Ken Whitneys Tool Rack he made in this thread,http://www.sawmillcreek.org/showthre...t=#post1588127 , and contacted him for more info on it. Ken was nice enough to send me more info and pics, he also posted that info and pics here for all to use.> http://www.sawmillcreek.org/showthre...cher-Tool-Rack The "Rocket Launcher" ...
Archive
Recent Comments