• Recent Articles

  • Hottest Threads

    Dave Anderson NH

    Time for some levity

    Thread Starter: Dave Anderson NH

    With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

    Last Post By: Jim Allen Yesterday, 6:01 PM Go to last post
    Josh Baldwin

    Best Shaper Under $5000?

    Thread Starter: Josh Baldwin

    Hey everyone I have a nice router table, but I've been thinking of upgrading to a shaper. I'm thinking 5hp would be ideal, but I'm not sure what other features exactly I should be looking for. There are 3 that seem like a good fit and I'm hoping to get some feedback based on their specs and/or...

    Last Post By: Patrick Kane Yesterday, 10:37 AM Go to last post
    Kevin Jenness

    Notre Dame roof reconstruction

    Thread Starter: Kevin Jenness

    My son Miles is in Normandy until August working on a crew fabricating trusses and other elements for the nave and choir of the cathedral. He is one of a half dozen American timber framers working on the project, which is being undertaken by two French companies https://www.remy-desmonts.com/ and...

    Last Post By: Mel Fulks Yesterday, 10:04 PM Go to last post
    Roger Feeley

    Safe storage for a 22ga rifle

    Thread Starter: Roger Feeley

    I just read that Virginia requires safe storage. I have my dads 22ga rifle that he had when he was a kid. I don’t know exactly when he got it but it’s pretty old. He was born in 1908. the gun breaks down into two pieces and is stored in some sort of long sock that’s supposed to prevent rust....

    Last Post By: Tom M King Yesterday, 9:48 PM Go to last post
    David Falkner

    Acoustic guitar - Build #2

    Thread Starter: David Falkner

    I've talked about this several times and I'm finally back to building #2! When I built my first guitar I didn't have the CNC, actually built the CNC while I was finishing that guitar so the only job I did on the CNC for that guitar was a little bit of the bridge. I began build #2 while I was...

    Last Post By: David Falkner Yesterday, 7:30 PM Go to last post
    Zachary Hoyt

    My new bandsaw, I hope...

    Thread Starter: Zachary Hoyt

    I had the high bid tonight on this Rockwell/Delta 28-350. I've been looking for and bidding on these for the last few years, and I was the back bidder a few times, but this one went for a very good price. My reserve bid was $600. It's possible that there's something terribly wrong with it, but...

    Last Post By: Bill Dufour Yesterday, 9:55 PM Go to last post
  • Sawmill Creek News RSS Feed

    by Published on 02-27-2011 5:33 PM     Number of Views: 28127 

    Do you have woodworking knowledge you're just dying to share?
    Want to be an author at Sawmill Creek?

    Now you have a new area to publish articles!

    If you want to publish an article, you can join our authors group, which gives you access to a forum which is open only to would-be authors at SawmillCreek. This is a staging area for new articles, where you can post a new article, and we'll review for publication. Once you're ready to publish it, we'll promote it on the front page of SawmillCreek!


    The process is simple:

    1. Join the Authors group by visiting this page.
    2. Once you have access, visit the Authors forum.
    3. Start your article by creating a new thread in that forum.


    TIPS

    If your article is too long for a single post, don't fret ! Spread your article over multiple posts, and we'll merge them together into a single post when the article is ready to be published.

    Try posting pictures inline for visual interest.

    Choose a catchy, yet descriptive title!

    Writer's Block?

    We're looking for tool reviews, woodworking tips, woodturning techniques, jigs and fixtures, finished projects step-by-step, finishing techniques, social woodworking experiences, and even good compilations of our existing thread topics.

    Good luck and Happy writing!
    _Aaron Koehl_