With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Do you consider tools as dangerous?
https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/
I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
For those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...
I had the high bid tonight on this Rockwell/Delta 28-350. I've been looking for and bidding on these for the last few years, and I was the back bidder a few times, but this one went for a very good price. My reserve bid was $600. It's possible that there's something terribly wrong with it, but...
I will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....
has anyone done a cope and stick micro/skinny shaker setup, or is the consensus that it's always a miter wrap? i talked to Great Lakes a while back, and they hadn't seen it (or at least my rep hadn't), curious what others have done. i would much, much rather make them on the shaper than at the...
Published on 01-02-2011 5:00 PM
Number of Views: 25603
The link below is my review of the 62" Excalibur Sliding Table I purchased in 1999. More than productivity the principal reason for purchasing a slider was safety.
Over eighteen months ago we purchased an Excalibur sliding table as an add-on for our shop table saw
...
As others have already mentioned, the Tripoli and White Diamond polishing compounds that come with the Beal System may not be the best to use when buffing
Like Jim I have been following the shop/barn build from RR on the 'tube. The metal brackets and spacers keep the timber from contact with the concrete.
Sections
Recent Articles
Recent Polls
Recent Blog Posts
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Today, 6:44 PM