With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 1:36 AMDo you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: Warren Lake Yesterday, 12:35 PMFor those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...
Last Post By: Michael Burnside Yesterday, 1:15 PMI had the high bid tonight on this Rockwell/Delta 28-350. I've been looking for and bidding on these for the last few years, and I was the back bidder a few times, but this one went for a very good price. My reserve bid was $600. It's possible that there's something terribly wrong with it, but...
Last Post By: Jim Becker Yesterday, 9:43 AMI will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....
Last Post By: Tom M King Yesterday, 10:05 PMhas anyone done a cope and stick micro/skinny shaker setup, or is the consensus that it's always a miter wrap? i talked to Great Lakes a while back, and they hadn't seen it (or at least my rep hadn't), curious what others have done. i would much, much rather make them on the shaper than at the...
Last Post By: Maurice Mcmurry Yesterday, 7:17 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 50)
That movement is from the inertia of the gantry and spindle head's mass moving and then stopping. That's where the heavier welded machines come into play
Jim Becker Today, 9:06 AMWith regard to this part of your question, yes, you can connect the Festool hose to your DeWalt sander, using one or more adapters sold by DeWalt. Assuming
David Stone (CT) Today, 9:05 AMThe bottom line that I see is that using the appropriate heavy steel post brackets on either poured piers or a stem wall eliminates the largest threat
Jim Becker Today, 8:58 AMYes, their spiral offerings are nice and they are great to do business with, too. Since they also do quick connect, you can still use that in conjunction
Jim Becker Today, 8:50 AMI really prefer a floor model so I can drill the ends of table legs and other taller stuff. And the footprint is smaller.
Tom Bender Today, 8:48 AM
vBulletin Message