Inflation may be less, but everything still seems to be going up in price. Verizon just increased my cell phone bill by $5 per month. My monthly bills have gone up by at least $200 per month since 2020. That doesn't include the high cost of food. It doesn't help that my wages are 15% less than...
Last Post By: Dave Zellers Today, 12:29 AMDo you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: Ron Citerone Today, 8:32 PMHey everyone I have a nice router table, but I've been thinking of upgrading to a shaper. I'm thinking 5hp would be ideal, but I'm not sure what other features exactly I should be looking for. There are 3 that seem like a good fit and I'm hoping to get some feedback based on their specs and/or...
Last Post By: Jim Becker Today, 8:06 PMI've been with Amica for years. My homeowners increased 53% and my car 28%. No claims or changes in policy. When I google "2023 homeowners insurance increase". Most info predicts 7-9% for inflation. I guess it's time to shop for insurance.
Last Post By: Jim Becker Today, 10:19 AMHow do I get this router bit out of here? Tug as might, it won’t come out. I tried some WD40 recently but it didn’t help at all. I’ve since read that I’m not supposed to use a lubricant of any kind. So, what do I do please?
Last Post By: Jimmy Harris Today, 11:21 AMThis SCMI/Samco Unilev 15 arrived at my shop last week. I'll be using it with a power feeder to sand edges. I'm working on an attachment that will let me work to a final dimension with precision. This type of sander is more popular in Europe than here in the US. I haven't come across many of...
Last Post By: Albert Lee Today, 2:44 AMSoda Pop (Votes: 1)
Soda (Votes: 19)
Pop (Votes: 19)
Coke (Votes: 5)
Cola (Votes: 0)
Soft Drink (Votes: 7)
Cold Drink (Votes: 1)
Tonic (Votes: 0)
None of the above (Votes: 6)
Some sliders allow a dado, some do not.
Terry Therneau Today, 9:17 PMSo I'm preparing to move my shop across the country and am selling my trusty sawstop. I'm planning on buying an as-yet-undetermined sliding table saw.
Aaron Liebling Today, 9:13 PMThank you. I have a fence set up on my Davis Wells where I can index my pieces quickly and it works. It isn't as fast as drilling both holes at once.
Michael Schuch Today, 9:09 PMI've been trying to figure out the wiring needs for the VFD to run the 3 phase motor on the bandsaw I've been posting about lately, and have run into
Zachary Hoyt Today, 9:04 PMJimmy, I suspect that the problem is caused by a compound curve, that is, the combination of a dip (sway back) and curve in the back support (steel back).
Derek Cohen Today, 8:59 PM
vBulletin Message