With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: William Lessenberry Yesterday, 6:05 PMSays it all.. I was yelled at for two years in 1983-1985. Got hurt in 1985 on the table saw . Changed jobs and finally work myself up to a foreman..Did this for 37 years. Was on another forum and was told they do not recognize professionals . What does that mean? I did kitchen cabinetry for...
Last Post By: Edward Weber Yesterday, 1:58 PMInflation may be less, but everything still seems to be going up in price. Verizon just increased my cell phone bill by $5 per month. My monthly bills have gone up by at least $200 per month since 2020. That doesn't include the high cost of food. It doesn't help that my wages are 15% less than...
Last Post By: Dave Zellers Today, 12:29 AMHey everyone I have a nice router table, but I've been thinking of upgrading to a shaper. I'm thinking 5hp would be ideal, but I'm not sure what other features exactly I should be looking for. There are 3 that seem like a good fit and I'm hoping to get some feedback based on their specs and/or...
Last Post By: Josh Baldwin Yesterday, 10:16 PMDo you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: Tom Trees Yesterday, 11:52 PMHow do I get this router bit out of here? Tug as might, it won’t come out. I tried some WD40 recently but it didn’t help at all. I’ve since read that I’m not supposed to use a lubricant of any kind. So, what do I do please?
Last Post By: George Yetka Yesterday, 3:01 PMSoda Pop (Votes: 1)
Soda (Votes: 19)
Pop (Votes: 19)
Coke (Votes: 5)
Cola (Votes: 0)
Soft Drink (Votes: 7)
Cold Drink (Votes: 1)
Tonic (Votes: 0)
None of the above (Votes: 6)
Bought mine recently for about $750 USD.. one small problem. it doesnt have the fence!!
Its an older model, an Unilev 15m, but I am guessing
I have a cast iron Davis Wells horizontal boring machine that I rebuilt. It gets some use. A two head (2 drill bit head) would be faster and more useful.
Michael Schuch Today, 2:20 AMGood idea to cut one or more plywood pieces to fill in the base. Then throw in some heavy iron stuff to add ballast. Especially if you add wheels or
Bill Dufour Today, 1:19 AMAlso ... the whole structure will be bolted to joists in multiple locations/heights to hold it up and keep it stable.
David W Sparks Today, 12:31 AMI haven't got that far in the drafting process. 3D Software is new to me. I've historically done this with a pencil and paper. But to visualize my intention
David W Sparks Today, 12:30 AM
vBulletin Message