Over 180 GGMG members!

  1. Roger Chandler
    Roger Chandler
    This group now has 181 members at the last count, and I see this as a validation of the choices the members have made to use the Grizzly brand lathes. Folks looking for features, value and quality are beginning to take the Grizzly lineup seriously. While some years ago, the Grizzly lathes were behind in features and were not well thought of in turning circles, that perception is certainly changing now! With features like VFD, Reversing, and good machining, the Grizz lineup seems to be catching up to the state of the art, and more widely accepted Asian brands.

    Glad everyone is aboard.....this has become quite a support group for us all!
  2. Brice Rogers
    Brice Rogers
    Roger, thank you for starting this group and for maintaining the GGMG. I value the suggestions that the group members have given me.
  3. Mark Greenbaum
    Mark Greenbaum
    I watch these threads and posts almost daily for helpful, insightful information. Thanks, again, Roger for guiding me to the G0766 enjoy my lathe immensely. I turned a 12" pine dish last night in less than an hour.
Results 1 to 3 of 3