Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

Are your tools dangerous?

Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...

How much does a shop build add to property value?

For those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...

MRI Question

My doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...

Point of Use Hot Water Heater Questions

Hot water travels about 60 feet from the tank to our upstairs bathroom and it takes too long to get there. I'm thinking about installing a point-of-use heater with a mini-tank but don't know if it will do what I want. Can I install a 2.5 gallon POU heater in the hot water supply to the bathroom and...

Major upgrade- Grizzly 24” bandsaw has arrived

I will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....

Spraying Enduro Var II

I feel like I should chip in for the cost you have in the finish you two have convinced me to stay away from. Many thanks!

Spraying Enduro Var II

Bill, did you ever overcome the bubbles with EV II? I'm having the same problem when brushing it. I haven't tried spraying it yet, but after finding

Buffing wipe on poly

I try to avoid white diamond if there are inclusions or if the wood is dark. It gets in the inclusions and its tough to get out. I definitely do not

Money saving question/idea for contractors

Hey there once again. My daytime job finds me at my buddy's 'cabinet shop' where no actual woodworking is done. We're a cabinet supplier with a little

Township building codes.

Looking further on the net one reason is for fire safety, maby I will be able to get a variant.

SC Pig-Picking