How to bend wood like this - Outdoor furniture project

Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...

MRI Question

My doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...

How many miles do you get out of your car brakes?

I drive a 2006 Toyota mostly on the highway. It has 90,000 miles with the original brakes. I don't hear any squealing on the brakes and they work fine. What do you think?

Drill w/guide or router?

Here's one I've been going over for the last 6 months. We have sliding pocket doors that separate our dining room and our family room. There are two of them 30 inches wide and they meet in the middle to form one 60 inch opening when open and a solid "wall" when closed. When they are open,...

Looking for feedback before I buy an Avid CNC

Good day all. I appreciate the time to read and give feedback. I think this is the right machine and price, but want feedback. The time has come. I need a CNC to stay competitive and I also just want to create in new ways. I have “non-buyers remorse” for stopping bidding on a beautiful 5x10...

Build a case for some chisels?

At least one that looks better than this? I think I can build something a little bit better than that plastic blister pack... Maybe take a plan from Paul Sellers Masterclasses, and build a case? and.. Will have to change a couple sizes...

Drawer frame flexing when pulling handle due to large 44" width -possible solutions?

It's plywood. Just glue the bottom in.

Cross Cut Sled

If you can increase your accuracy with almost no more work, why not? True, this isn't a machine shop. But why not start off as accurate as possible,

Cross Cut Sled

The KM tool is a cool innovation to our craft. Necessary? No. If you want it, get it, enjoy. I squared my sled with a 1/8" gauge block in the

Boggs Spokeshaves

More speciality tools

Boggs spokeshaves, Flat and Round. Very lightly used with original boxes and packing. $330 for both shipped

Building another 4 x 4 outdoor dining table

what do you think of this? Teak like? thanks brian

https://www.samsclub.com/p/6-pc-dini...plp_product_35

SC Pig-Picking