Considering a lot of us are going or have gone that direction , I thought it a good idea to combine our knowledge pool in one thread. So I have started one. Those of you that have already posted to other threads can perhaps repeat and consolidate the posts here or at least point to other posts on...
It's the small things that often make the biggest difference. I've found that the crafty veterans seem to know a little trick here or there that make turning better, safer, faster, or easier. So I'm throwing out a challenge: give us your best "nifty" and when this thread is done, it will make a...
Hi all,
This post may portray me as embarrassingly stupid and inefficient, but whatever. Here goes.
For the last 15 years, regardless of the sharpening media, I have used the following method:
1) hone a secondary bevel on a coarse stone until I can feel the wire edge on the back, all the way...
Hi everyone,
I'm new here and this is my first thread and post on this forum. I would like to introduce to everyone a new process me and my son developed to laser engrave true 8bit shades of grey using a 445nm laser diode. There is no dithering a image first, no pulsing or overlapping dots to...
If didn't have a good set of Shapton pro stones I'd be looking at these. The combo stones appear to be a pretty good deal. http://www.lie-nielsen.com/catalog.php?sku=2-OHISHII
I have been working with Versatex to help test new products, and one of my requests was that they develop a biscuit that can be used with a standard biscuit
My current small project is making a display base for a Ryder Cup trophy(which I also helped to make years ago),currently on display at the golf course
Sections
Recent Articles
Recent Article Comments Widget
Recent Polls
Recent Blog Posts
Chinese laser purchase/Shenui/Laserworks tips and tricks thread
Thread Starter: Rodne GoldConsidering a lot of us are going or have gone that direction , I thought it a good idea to combine our knowledge pool in one thread. So I have started one. Those of you that have already posted to other threads can perhaps repeat and consolidate the posts here or at least point to other posts on...
Last Post By: George Carlson Yesterday, 9:07 AM