Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: Warren Lake Today, 12:35 PMFor those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...
Last Post By: Michael Burnside Today, 1:15 PMI had the high bid tonight on this Rockwell/Delta 28-350. I've been looking for and bidding on these for the last few years, and I was the back bidder a few times, but this one went for a very good price. My reserve bid was $600. It's possible that there's something terribly wrong with it, but...
Last Post By: Jim Becker Today, 9:43 AMI will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....
Last Post By: Malcolm Schweizer Today, 3:36 PMI looked at Sawmill Creek threads from 2020 until now. I figured that tool costs, availability and opinions change after 4 or more years. Over that time, there were favorable comments about Festool, Bosch and Mirka. My typical use is flat surfaces on cabinet faces and panels, not many edges...
Last Post By: Ray Selinger Today, 12:35 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 9)
Maybe. Depends on the person and the tool. (Votes: 49)
Unfortunately, as the population grows so does the half that's below average intelligence.
Tom M King Today, 4:55 PMYou should spend some time watching RR Buildings on the 'Tube. Those brackets are not "sheet metal"...they are heavy, welded steel and designed
Jim Becker Today, 4:23 PMInfo on Sweetgum from the wood database https://www.wood-database.com/sweetgum/
Lloyd McKinlay Today, 4:22 PMThanks Stan I found them on amazon , Johnson was way out of line in price yikes
Bert Kemp Today, 4:17 PMI am shocked the dealer would even offer to let you register the vehicle yourself to save the $500. Most of the $500 is either profit, or it covers administrative
Brian Elfert Today, 4:12 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Today, 2:42 PM