Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

How to bend wood like this - Outdoor furniture project

Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...

MRI Question

My doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...

Graule ZS135 Radial Arm Saw voltage question

Recently purchased this Graule at auction in Germany, it went for cheap but import and shipping resolved that bargain aspect pretty quickly. I'm rather unsure of what the voltage is, the tags seem to be giving mixed signals. I wrote the company, but I expect it'll be a while before they provide...

Drill w/guide or router?

Here's one I've been going over for the last 6 months. We have sliding pocket doors that separate our dining room and our family room. There are two of them 30 inches wide and they meet in the middle to form one 60 inch opening when open and a solid "wall" when closed. When they are open,...

Township building codes.

Any one know what the reason why a metal gazebo needs to be at least ten feet from the house? Per township ordnance :confused:

Bugs !

Location and climate. Move to antarctica,
Would bagging it with dry ice to displace O2 kill bugs?
Bill D

Is there a small, accurate table saw?

The Delta Homecraft 8 1/4 inch is another nice vintage option. These had a drill press and jointer that shared the same motor. I have the drill press

Krylon UV Archival Varnish - to prevent box elder color fade

You might want to look at the reviews on Krylon's page. https://www.krylon.com/en/products/c...tem-ba23edc080

Bugs !

The center of the wood has to reach 133 degrees, so usually sterilizing wood requires heat around 150 degrees F to get the center hot enough.

Bugs !

As Cameron suggests, heat treating the table should kill the bugs.
Alternatively if a house in your neighborhood is being tented you could ask to

SC Pig-Picking