How to bend wood like this - Outdoor furniture project

Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...

MRI Question

My doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...

How many miles do you get out of your car brakes?

I drive a 2006 Toyota mostly on the highway. It has 90,000 miles with the original brakes. I don't hear any squealing on the brakes and they work fine. What do you think?

Looking for feedback before I buy an Avid CNC

Good day all. I appreciate the time to read and give feedback. I think this is the right machine and price, but want feedback. The time has come. I need a CNC to stay competitive and I also just want to create in new ways. I have “non-buyers remorse” for stopping bidding on a beautiful 5x10...

Drill w/guide or router?

Here's one I've been going over for the last 6 months. We have sliding pocket doors that separate our dining room and our family room. There are two of them 30 inches wide and they meet in the middle to form one 60 inch opening when open and a solid "wall" when closed. When they are open,...

Build a case for some chisels?

At least one that looks better than this? I think I can build something a little bit better than that plastic blister pack... Maybe take a plan from Paul Sellers Masterclasses, and build a case? and.. Will have to change a couple sizes...

Drill w/guide or router?

Edward's suggestion seems like the way to go, a magnet on one side only and a washer on the other. You can reduce the grip and the snapping noise by setting

Making screen panels for a lake view

Personally, I'd use Ipe or one of the other tropicals sold as decking. Much stiffer than poplar so you'll be able to use narrower rails and stiles, and

Shop Roof Insulation - PIC

Hard to tell from the picture, but perhaps reconsider using batt insulation. With that blocking, having continuous venting from soffit to ridge looks

Township building codes.

A way to get around the 10 foot rule that is to be sure the auxiliary structure is less than 100 square feet. Garden sheds and small, portable, auxiliary

Creeker’s Past Weeks Accomplishments

I finished up on an armoire that have been working on for several months: https://sawmillcreek.org/showthread....-An-Armoire%85. Helped my daughter’s

SC Pig-Picking