• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Julie Moriarty

    Electric Bass Guitar Build

    Thread Starter: Julie Moriarty

    My SO wants a bass guitar. And I'm getting bored watching the lacquer cure on the other guitar. :) I took some 1:1 scaled drawings of bass guitars, glued them to 1/4" MDF, and started cutting templates. The neck and back are completed, with the exception of the neck heel. I don't want to cut...

    Last Post By: Julie Moriarty Yesterday, 8:38 PM Go to last post
    Steve Kinnaird

    12x30 Workshop About To Become A Reality

    Thread Starter: Steve Kinnaird

    I started buying wood working tools about 3 years ago and planned on converting a 12 x 20 ft space in our 1 car garage into a workshop. Well, as we all know plans can change. My son and his 2 kids (our grandchildren) needed a place to stay after his divorce and the garage became an over stuffed...

    Last Post By: Mike Heidrick Today, 12:49 AM Go to last post
    Roger Chandler

    G0766- Before & after pics of toolrest fix

    Thread Starter: Roger Chandler

    Here is the original toolrest the way it came from the factory on my G0766 Here is where I marked the step area on the post to where it should have been....... Here is where the rest came back from the machine shop today........ You can see where the machining took off the...

    Last Post By: Matt Schrum Yesterday, 12:50 PM Go to last post
    David Ragan

    Nitrogen Tires

    Thread Starter: David Ragan

    What the deal with Nitrogen tires on wifes new Honda Pilot? Less oxidation to the innerds of the tire? How do you air up if needed? Necessary for on-board pressure detection?

    Last Post By: Mike Circo Today, 10:38 AM Go to last post
    David Ragan

    4th of July

    Thread Starter: David Ragan

    Howabout an apolitical 4th of July thread? Like, what is one thing that you mostly think about when considering the 4th? Something besides the obvious. Here's mine. With all the beating up on the French the last few decades, they deserve a huge amount of credit for helping us out with...

    Last Post By: Scott Shepherd Today, 8:31 AM Go to last post
    Mike Berrevoets

    Shaker door shaper cutters

    Thread Starter: Mike Berrevoets

    I need to make cabinet doors and 5 panel drawer fronts for our kitchen remodel. I've never used a shaper before and I'm looking at shaper cutter options. My wife wants a "shaker" door with the beveled edge. It looks like there are three or four options that I've found so far. MLCS has a...

    Last Post By: Joe Calhoon Today, 10:10 AM Go to last post
  • Steve Grazier

    There is no available content written by Steve Grazier