• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Julie Moriarty

    Electric Bass Guitar Build

    Thread Starter: Julie Moriarty

    My SO wants a bass guitar. And I'm getting bored watching the lacquer cure on the other guitar. :) I took some 1:1 scaled drawings of bass guitars, glued them to 1/4" MDF, and started cutting templates. The neck and back are completed, with the exception of the neck heel. I don't want to cut...

    Last Post By: Julie Moriarty Today, 8:53 AM Go to last post
    Jeffrey Michael Wilson

    Need help with Chinese Laser

    Thread Starter: Jeffrey Michael Wilson

    Hi, I have a 50 watt Chinese laser. Haven't had it very long. Today I was burning some things, then all of a sudden....no laser. Like no power to laser. Power supply fan and light working. I'm wondering about the water sensor. I have the brass and silver red cap kind. I'm wondering if maybe it...

    Last Post By: Jeffrey Michael Wilson Today, 12:14 AM Go to last post
    Eduard Nemirovsky

    low pressure in tires with cold weather

    Thread Starter: Eduard Nemirovsky

    I have tires on my track for last 23000 miles. One of the tire were repaired summer time. Now every time when temperature fall in the morning -low pressure lights is on. Tires with normal wear thread, close to be replace but not yet, at least by miles rating. Do you think I need to replace all...

    Last Post By: Pat Barry Today, 12:09 PM Go to last post
    Keith Jackowski

    How do you cut a straight edge on rough sawn lumber?

    Thread Starter: Keith Jackowski

    Hi guys, getting ready do start on my winter project, building a bed loft for my daughter. She bought a birch desk chair from Ikea, Ugh, and now she wants me to build her loft to match the chair. I found a guy selling rough sawn maple at a great price and has an assortment of sizes. figured...

    Last Post By: M Toupin Yesterday, 10:19 PM Go to last post
    Mike Dowell

    Considering purchase of a new RO sander

    Thread Starter: Mike Dowell

    Right now, I've only got one hand sander and I use it for almost everything. It's a Dewalt D26453 variable speed RO with 3/32" stroke. http://www.dewalt.com/tools/woodworking-sanders-random-orbital-sanders-d26453k.aspx It's OK. Of course, I have very little to compare it with although I've...

    Last Post By: Mike Dowell Today, 10:54 AM Go to last post
    John Piwaron

    Fire! Festool CT22 vac

    Thread Starter: John Piwaron

    I just had a most unpleasant thing happen. I was routing a mortise with my Festool OF2200 router connected to my Festool CT22 vac and during the process of making the mortise, the bag in the vac started on fire. Billowing smoke coming from it. Well, quick, out the door with that! The wood is new...

    Last Post By: John Piwaron Today, 2:36 PM Go to last post
  • Ron Petley

    There is no available content written by Ron Petley