• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Walt Caza

    The Great Morris Chair project

    Thread Starter: Walt Caza

    Good Day to the Creek, Please allow me to lay out the who, what, where, why, when and how... This is an invitation to all Creekers: Gary Zimmel and Walt Caza cordially invite you to join us in a remote build of a classic furniture project. We are each going to build the same Morris chair...

    Last Post By: Michael Peet Yesterday, 10:18 PM Go to last post
    Mike Heidrick

    Pole Barn 40X64X16

    Thread Starter: Mike Heidrick

    Signed a contract yesterday with S&L Builders out of Indiana for a 40X64X16 Pole Barn with a 10X24 porch. Build date August 18, 2014. Plan to install Pex for raidant floor heat. Concrete slab 5" thick. Also doing 1.5" closed cell foam under the pad. Built on Laminated posts in ground. Will...

    Last Post By: Mike Heidrick Today, 2:07 AM Go to last post
    Anthony Brown

    I Need Help Fixing a Problem With How to Attach Breadboards to My Table Top

    Thread Starter: Anthony Brown

    I am building a 72" x 40" x 6/4 solid Hickory table top. I have already glued together the planks to get the width for my table top, but I have not attached the breadboards yet. My plan was to glue the breadboards to the rest of the table top just like I did with the other planks, but after doing...

    Last Post By: Alan Schwabacher Today, 1:32 PM Go to last post
    Michael Peet

    My Roubo Build

    Thread Starter: Michael Peet

    My Roubo is finally done! This was a huge project and quite a challenge to a noob such as myself, but after more than a year of work it turned out to my satisfaction. I used the plans in Schwarz's book, modified slightly to accomodate the Benchcrafted wagon and leg vises. I briefly considered...

    Last Post By: eric burns Today, 12:13 PM Go to last post
    Van Huskey

    Lets talk bandsaw blades!

    Thread Starter: Van Huskey

    First, let me say I do not claim to be a bandsaw blade expert but I am planning to share the conventional wisdom and personal experience I have gleened over the years. Feel free to point out where your experience or understanding of conventional wisdom differs from mine. Cliff's Notes at the...

    Last Post By: Clay Fails Yesterday, 8:01 PM Go to last post
    Julie Moriarty

    Conduit Bending 101

    Thread Starter: Julie Moriarty

    Since many here want to install conduit in their workshops, I thought I'd get a conduit bending workshop going here. The only damage you can do is too the pipe, and maybe your ego. ;) Of course, you need to have designed the system correctly. We can do that in another thread, if there's an...

    Last Post By: Julie Moriarty Yesterday, 10:47 PM Go to last post
  • Terry Beadle

    There is no available content written by Terry Beadle