Sawmill Creek Woodworkers Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

Is CBN simply worth the extra cost?
Thread Starter: Matt Mackinnon
I knew from the start that getting into woodworking was going to be a very expensive hobby. And even more so when I took up turning. I recently bought a whole lathe setup with a wolverine jig and grinding wheel. The fellow who I bought it from had 2 oneway blue 8" grinding wheels in 54 and 120...
Last Post By: robert baccus Today, 1:11 AM

BBQ advice needed
Thread Starter: Rick Potter
I just finished looking at old threads about BBQ's. The weber seemed to be the choice in '05/'06. Is this still the case, or is there a new best choice? I just need a basic, medium size gas BBQ that runs on natural gas. I think I want stainless burners and grates, since I have had problems...
Last Post By: Rick Potter Yesterday, 5:08 PM

Grizzly Track Saw Review from TWW
Thread Starter: Joe Shinall
thewoodwhisperer.com/videos/grizzly-track-saw-review/ Well, Marc did a rather good review of the Grizzly Track saw and I have to say I'm on the fence about it after this. The wobble and spring are my biggest problem. Any thoughts? DC doesn't bother me, I would use it outside anyways and...
Last Post By: Art Mann Yesterday, 12:48 PM

Old plane blade too hard?
Thread Starter: Shaun Mahood
I've got an old wooden jointer plane with a blade that I have never been able to sharpen satisfactorily. I just bought a bench grinder and have given it another try. It seemed to take longer to grind than my other blades, and after that is taking much more time and effort to sharpen on my stones. I...
Last Post By: Steve Voigt Yesterday, 7:16 PM

A Scientist Explains The Physics of Resawing
Thread Starter: Julie Moriarty
I don't know he's a scientist...:rolleyes:
Last Post By: Sam Murdoch Yesterday, 10:33 PM

Anyone here use a CPAP?
Thread Starter: Brian Elfert
I have had trouble sleeping for several years. It got even worse this winter so my doctor sent me to a sleep center for a sleep test. It turns out I have moderate sleep apnea so they gave me a CPAP on Friday. I used it for the first time last night and I couldn't get to sleep at all. After...
Last Post By: Bill Summerlin Yesterday, 6:26 PM

Bernie Weishapl

There is no available content written by Bernie Weishapl

Recent Polls
If you use clamp-together dust duct do you feel the money was well spent? (0 Votes)

What brand did you buy? (0 Votes)

Are you aware of any other brand that is interchangeable with it? (0 Votes)
Recent Forum Posts

Flow rate on water well?

My well is 420' deep & only produces 1.5 gal/min. Pump is 320' feet down & I have a static level 5' from the top of a 6'' casing. Sometimes it
Jay Jolliffe Today, 5:05 AM

Need advice on best method/motor to exhaust sanding dust outside

Thanks guys for your imput, The sanding is from my mustard monster, I just need to impliment a few of the tips I have been given here. My dust deputy
Breck Whitworth Today, 4:52 AM

Fine wood or Fire wood?

Here's an example of the tearout that occurs with little warning. The only possible (?) tell is that the grain changes direction in this area - but it
Derek Cohen Today, 4:28 AM

Problem Lining up Dominos

Fred, I use the alignment pins to make tight first cuts on the edge and adjacent face, then widen the cuts for the rest of the mortises. I actually make
Bill Neely Today, 3:10 AM

Need advice on my laser choice predicament

If you go with GCC , get a 40w Spirit... get as much power and as big a model as you can afford.. but heed Ross's advice too..for $6500 or less you can
Rodne Gold Today, 2:35 AM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Bernie Weishapl

Recent Polls

Recent Forum Posts

Recent Blog Posts