• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Michael Yadfar

    Is the table saw (non sawstop) the most dangerous tool in the shop?

    Thread Starter: Michael Yadfar

    I've been thinking to myself about what the safest and most dangerous tools are in the shop. Someone told me bandsaw was the most dangerous once, but I think that may be the safest saw in the shop. It's hard to determine the safest because all power tools are dangerous, but I think the most...

    Last Post By: Jason White Yesterday, 10:40 PM Go to last post
    Jerome Stanek

    How big is your house

    Thread Starter: Jerome Stanek

    I have been following the house thread and was wondering how the size of the houses are around the country. I see some have a house over 2000 sq. ft and they say that is to small for a family of 3 and others have a 1500 sq ft house and a family on 5. I have a 1600 sq ft house and only 1 an 1/2...

    Last Post By: Brian Elfert Yesterday, 8:29 PM Go to last post
    Lewis Ehrhardt

    Is it time for a Mac?

    Thread Starter: Lewis Ehrhardt

    I've had enough of the trovi takeovers on my computer and all the constant updates every other hour. I have been using Windows started with 3.1, 95, on and on ad nauseum to now Windows 7. All my software is for Windows. BUT, if what I understand is right???, I can switch to a Mac and not have all...

    Last Post By: William Adams Yesterday, 5:35 PM Go to last post
    Mike Suiter

    Grizzly vs ClearVue cyclones

    Thread Starter: Mike Suiter

    I'm going to put a cyclone in my new 30x40 shop I'm building and finally retire my HF DC (it just won't die). I've been doing a lot of searching and it pretty much seems that anyone that has a cyclone loves it no matter what brand. I've decided my choice will be between the Grizzly G0441 and the...

    Last Post By: marty shultz Yesterday, 8:12 PM Go to last post
    Dan Hintz

    Buying houses... Brian was right :-/

    Thread Starter: Dan Hintz

    Elfert was right, what a royal pain this has been. Although SWMBO and I have discussed moving to a new place in passing many times over the last few years, I suddenly got a burr up my butt a couple of weeks ago. So we looked on Zillow, did a little market research, and took a long drive to see...

    Last Post By: Dan Hintz Yesterday, 9:28 PM Go to last post
    Charles Taylor

    Porter-Cable Safety Recall

    Thread Starter: Charles Taylor

    Porter-Cable has issued a safety recall today on the bases of some of its production routers: http://www.portercable.com/SafetyAnnouncements.aspx?BlockID=793bd768-5a32-4761-80df-4849548c80e7 The explanation is that the handles on these bases aren't insulated and thus represent a shock hazard. ...

    Last Post By: ray hampton Yesterday, 11:55 PM Go to last post
  • Bill ThompsonNM

    There is no available content written by Bill ThompsonNM
  • Recent Polls

    What to use for mitre bar stock? (Votes: 74)

    1. Anything other than $40 worth of Incra mitre bars is not worthy of your crosscut sled. (Votes: 6)

    2. Not worth $40, but you really should take the time to drill/tap steel bars for your sled. (Votes: 13)

    3. Run what you brung, square the sled to the blade, shoot some brads, countersink, move on. (Votes: 41)

    4. You are over-thinking this in a big way. Nothing to see here, move along. (Votes: 11)

    5. Carrots and peas. (Votes: 3)

  • Recent Forum Posts

    Steve Crawford

    Any Advice, Acrylic Adhesives?

    Thanks guys... some good advice and food for thought.

    Steve Crawford Today, 6:01 AM Go to last post
    Dennis Aspö

    reading metric tape measure

    I never know what to expect, sometimes it's millimeters, sometimes centimeters, sometimes its meters. People use whatever they feel like, I also swap

    Dennis Aspö Today, 3:54 AM Go to last post
    Derek Cohen

    The Chair is finished

    Pat, the finish was 5 or 6 coats of Livos Wood Oil and then polished with Howard's wax. The Livos oil is a wonderful alternative, and now much preferred,

    Derek Cohen Today, 3:09 AM Go to last post
    Stephen Tashiro

    Any candid info on EnableVue?

    A friend of mine is considering working for a company called EnableVue. One of EnableVue's services seems to be giving companies a favorable online image.

    Stephen Tashiro Today, 2:51 AM Go to last post
    Michael W. Clark

    Aget mfg Dustkop pushthrough cyclone?

    Good standard cyclones, commercial duty, a nice step up from hobby grade. They are popular in woodworking shops (commercial / small industrial). I would

    Michael W. Clark Today, 1:36 AM Go to last post
  • Recent Blog Posts