My SO wants a bass guitar. And I'm getting bored watching the lacquer cure on the other guitar. :) I took some 1:1 scaled drawings of bass guitars, glued them to 1/4" MDF, and started cutting templates. The neck and back are completed, with the exception of the neck heel. I don't want to cut...Last Post By: John Coloccia Today, 10:07 AM
I constantly see someone or another say that gas stations struggle because of the low profit margin on gas. Then I see the prices and wonder who are they trying to kid? The three stations a half mile from me is selling 87 octane for $3.55 a gallon. Meanwhile, the Get Go station that's 4...Last Post By: David Cramer Yesterday, 11:02 PM
Ok, we discussed tipping the oil change guy, but what about curbside carryout at Applebee's, or when you pick up at the local pizza joint, or you pick up Chinese for dinner? I always struggle with that. Usually I tip just under 20% on sit down (I round, usually down, to the nearest dollar from...Last Post By: David Weaver Yesterday, 10:01 PM
Ok, until now its all been fun and one-off projects. Now I got the idea to make up a batch of keychains for the range picnic next weekend. I wanted to cut 49 out of some 12x12 ply I had. Good plan, I thought. I first covered the entire sheet with masking tape. Wide roll. I had to put like...Last Post By: Bert Kemp Yesterday, 5:57 PM
Signed a contract yesterday with S&L Builders out of Indiana for a 40X64X16 Pole Barn with a 10X24 porch. Build date August 18, 2014. Plan to install Pex for raidant floor heat. Concrete slab 5" thick. Also doing 1.5" closed cell foam under the pad. Built on Laminated posts in ground. Will...Last Post By: Todd Burch Today, 3:00 AM
Parallelogram (Votes: 48)
Dovetailed ways (Votes: 15)
For sale brand new/never used Forest 10" 80 tooth ATB .105 kerf Chopmaster miter saw blade with 5/8 arbor. In original packaging.