• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Lester Sak

    Any experience with new Laguna 14/12 bandsaw?

    Thread Starter: Lester Sak

    In the market for my first bandsaw and have been doing a lot of research. This is for a small garage shop (9’x18’) and no access to a 220 line. So, I’m looking for the best quality 14” saw that will run on 110v. This will be for general use – curves, ripping thick stock and re-sawing so I...

    Last Post By: Mark Norfleet Today, 1:50 PM Go to last post
    Jim Koepke

    Our 'Brave New World' with Medical Profiling

    Thread Starter: Jim Koepke

    This is not my opinion, it is just sharing an article. The world we knew from five or six decades ago is changing faster than we ever knew. Actuaries predict your life span. Banks track your spending habits. Now, your employer can tell whether you’ll have diabetes a year from now. And the...

    Last Post By: Phil Thien Today, 2:02 PM Go to last post
    Steve Voigt

    Scratches on End Grain

    Thread Starter: Steve Voigt

    Today I went back to trying to sort out a skew mitre plane that I was working on. The original blade wouldn't hold an edge, and I was getting ugly scratches on end grain. I tried everything, and finally gave up and tried another blade. Still the same problem! I set it aside for a month, but went...

    Last Post By: Bob Jones Yesterday, 10:43 PM Go to last post
    Mike Suiter

    Grizzly vs ClearVue cyclones

    Thread Starter: Mike Suiter

    I'm going to put a cyclone in my new 30x40 shop I'm building and finally retire my HF DC (it just won't die). I've been doing a lot of searching and it pretty much seems that anyone that has a cyclone loves it no matter what brand. I've decided my choice will be between the Grizzly G0441 and the...

    Last Post By: Michael Liechty Today, 1:37 PM Go to last post
    Patrick Carpenter

    Lie Nielsen A2 issue?

    Thread Starter: Patrick Carpenter

    Has anyone else been a little underwhelmed by A2 plane blades from LN? I have a 60 1/2 block plane that is just awesome in almost every aspect but one. It gets pretty sharp, but does not seem to hold up well at all. Mostly when paring end grain it seems like it never takes more than 5-10 cuts...

    Last Post By: Winton Applegate Today, 1:00 AM Go to last post
    Mike Cozad

    Wood preferences

    Thread Starter: Mike Cozad

    I am/have never been a fan of oak. I have exactly 3 pieces of oak furniture in my house. 1 I built in shop class when I was 11 and didn't know any better. In fact, the shop teacher let me pick white oak for the legs and aprons of the night stand and the drawer front and top are red oak. Other than...

    Last Post By: Ole Anderson Today, 1:00 PM Go to last post
  • frank shic

    There is no available content written by frank shic
  • Recent Polls

    What to use for mitre bar stock? (Votes: 74)

    1. Anything other than $40 worth of Incra mitre bars is not worthy of your crosscut sled. (Votes: 6)

    2. Not worth $40, but you really should take the time to drill/tap steel bars for your sled. (Votes: 13)

    3. Run what you brung, square the sled to the blade, shoot some brads, countersink, move on. (Votes: 41)

    4. You are over-thinking this in a big way. Nothing to see here, move along. (Votes: 11)

    5. Carrots and peas. (Votes: 3)

  • Recent Forum Posts

    Prashun Patel

    peepee water

    I heard a very enlightening Radio Lab podcast on this subject.
    New York City used to dump its sewage into the Hudson until 1975. Over the next

    Prashun Patel Today, 5:33 PM Go to last post
    Jay Park

    Sanding between Coats of Finish

    I use a felt pad with my wet/dry 400G sandpaper. ( I don't go finer than 400G only because I'm to lazy to order 320G)

    link

    the

    Jay Park Today, 5:31 PM Go to last post
    Joshua Pierce

    Shop built dovetail saws

    Ron - seeing as you're someone who makes a whole lot of saws, I'd love to hear more about your method, if you'd like to share . . .

    Thin-kerf

    Joshua Pierce Today, 5:26 PM Go to last post
    Joshua Pierce

    How much to pay for a woodie jointer, and what to look for?

    There's what looks like, at first blush, a nice wooden jointer at a local antique shop. I passed, because I didn't have any cash in my pocket, and was

    Joshua Pierce Today, 5:21 PM Go to last post
    Jay Jolliffe

    Advice on making a door

    No Bridle joint. But joint with floating tenons & epoxy

    Jay Jolliffe Today, 5:20 PM Go to last post
  • Recent Blog Posts