Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: Warren Lake Yesterday, 12:35 PMFor those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...
Last Post By: Michael Burnside Yesterday, 1:15 PMMy doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...
Last Post By: Michael Weber Today, 11:07 AMI will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....
Last Post By: Curt Harms Today, 9:52 AMhas anyone done a cope and stick micro/skinny shaker setup, or is the consensus that it's always a miter wrap? i talked to Great Lakes a while back, and they hadn't seen it (or at least my rep hadn't), curious what others have done. i would much, much rather make them on the shaper than at the...
Last Post By: Maurice Mcmurry Yesterday, 7:17 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 50)
That gap in the stanley chisel and others I have. When I grasp it, the rim of the socket digs into the skin of my palm when I tighten my grip while malleting.
Rafael Herrera Today, 11:57 AMThat may however, be a symptom of the problem of the iron tending to not stay in place, leading to overtightening.
I would bend it back with
The problem was in the wiring connecting the power suply to the laser tube. ( Black and Red wires where damaged after 22 years of movements).
Nice!
It may be kind of small, but doing so avoids the one major drawback I find with many standard Roubo style benches. It puts the leg
There is fitted and then there's fitted.
Top chisel looks to be fitted well but maybe on the tight side.
Middle chisel has virtually no gap,
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 1:36 AM