Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

MRI Question

My doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...

Graule ZS135 Radial Arm Saw voltage question

Recently purchased this Graule at auction in Germany, it went for cheap but import and shipping resolved that bargain aspect pretty quickly. I'm rather unsure of what the voltage is, the tags seem to be giving mixed signals. I wrote the company, but I expect it'll be a while before they provide...

Drill w/guide or router?

Here's one I've been going over for the last 6 months. We have sliding pocket doors that separate our dining room and our family room. There are two of them 30 inches wide and they meet in the middle to form one 60 inch opening when open and a solid "wall" when closed. When they are open,...

Is there a small, accurate table saw?

I need to downsize my hobby woodworking shop a bit, and would like to have a table saw that is smaller than a cabinet saw with the extension table. Is there a smaller table saw that would still be as accurate as a cabinet saw? Most of the smaller saws are jobsite saws, and they don't seem to have a...

Township building codes.

Any one know what the reason why a metal gazebo needs to be at least ten feet from the house? Per township ordnance :confused:

Making screen panels for a lake view

Thank you for all the great discussion - to make things a little clearer what I am trying to accomplish I will post a few pics to help illustrate my question

Time for some levity

That "Linus" mug is pretty clever.

Corded Circular Saws

You really have to consider what your use will be.
I use an 18v 61/2" Makita extensively for 2x framing work and general construction.

Graule ZS135 Radial Arm Saw voltage question

Thanks, Joe! Glad to hear it!

I think the original single phase motors in this case are actually a 3ph motor with a capacitor on one leg,

Paint/lacquer over oil stain? Brand? Plywood. HVLP

Prime it with a rattle can of B*I*N, that will insure that the stain won't bleed through, then hit it with a rattle can of Krylon or Rustoleum.

SC Pig-Picking