• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Michael Pyron


    Thread Starter: Michael Pyron

    yep, mighty useful tools. I'm at a point in my life where I feel the need to upgrade from the Buck Brother's chisels I've been getting from Home Depot... the issue I see, is that quality chisels have wooden handles, and I use a 12 oz. hammer. I know my hammer VERY well, and since I'm an in...

    Last Post By: James Pallas Today, 2:19 PM Go to last post
    Mike Henderson

    Free SawStop Brake

    Thread Starter: Mike Henderson

    I was cutting a small piece of wood and before I knew it the blade was below the table and I had a small cut on my thumb. Don't even know exactly how everything happened. While the piece was small, I'd made the same cut many times before. Anyway, just a nick, bit of blood and a ruined...

    Last Post By: Ben Rivel Today, 1:35 PM Go to last post
    steven c newman

    Busy day today

    Thread Starter: steven c newman

    And now time for a few "Cold ones" First off, The Boss wanted a blind on the backdoor repaired with a new one.....New one needed those clips down at the bottom, to keep it from flopping around, used self-drilling drywall screws into the steel skin of the door...and had the driver tip drill into...

    Last Post By: steven c newman Today, 9:22 AM Go to last post
    Jeff Bartley

    Sharp chisels!

    Thread Starter: Jeff Bartley

    Sharp chisels yes! But not at the end, on the sides. I'm just wondering how many here have been cut up by the edges of their chisels? And does anyone purposely dull the side edges to prevent this? Jeff (with a slice on his index finger!)

    Last Post By: Stewie Simpson Today, 2:48 AM Go to last post
    Ben Rivel

    Building Your Own Oneida Realtime Filter Efficiency Gauge

    Thread Starter: Ben Rivel

    After studying the Oneida product page (LINK) and researching around the net I was able to figure out and put together the parts necessary to build my own Oneida Realtime Filter Efficiency Gauge. Its a very simple design and you can buy all the parts on your own for a lot cheaper than their kit. ...

    Last Post By: Rod Sheridan Today, 4:49 PM Go to last post
    Dan Forman

    Keeping bandsaw blade clean?

    Thread Starter: Dan Forman

    When cutting green wood into blanks, how do y'all keep your band saw blades from gunking up? I have heard that Pam cooking spray wiped on the blade helps, but I don't find it very effective. Any other suggestions? Thanks, Dan

    Last Post By: Jamie Straw Today, 4:28 PM Go to last post
  • Mike Cruz

    There is no available content written by Mike Cruz
  • Recent Polls

    Which BMI are you? (Votes: 92)

    1. Underweight (Votes: 5)

    2. Normal (Votes: 31)

    3. Overweight (Votes: 26)

    4. Obese (Votes: 30)

  • Recent Forum Posts

    Michael Weber


    LOL. More funny for a woodworker. Multiple interpretations

    Michael Weber Today, 6:07 PM Go to last post
    Ben Rivel

    Pony Tools suspends operations

    Wow, thats too bad. I bet the name will live on though and will now be made entirely in china.

    Ben Rivel Today, 6:06 PM Go to last post
    Ben Rivel

    Sawstop save

    Oh those are the worst! These DIY YouTubers that pop up overnight everyday showing people how to build their own bookshelves and coffee tables and have

    Ben Rivel Today, 6:04 PM Go to last post
    Joe Jensen

    Pony Tools suspends operations

    The founders statement makes it sound like the brand will continue to be sold through their sales arm and manufacturing in Chicago will cease. Bet the

    Joe Jensen Today, 6:01 PM Go to last post
    Joe Jensen

    Sawstop save

    Glad you were not hurt. When I was young I did tons of unsafe things and I was largely just lucky until I got a sawstop and became much more aware of

    Joe Jensen Today, 5:57 PM Go to last post
  • Recent Blog Posts