• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Rich Riddle

    Why Not Convert to Metric?

    Thread Starter: Rich Riddle

    I have a Hammer slider with a metric system installed on the fence. It's actually a much easier way to cut things and even build. Why haven't we simply adopted the metric system in the USA? It would prove much easier to figure fractions for those folks who are fraction challenged.

    Last Post By: Jim Koepke Today, 1:41 PM Go to last post
    george wilson

    Why don't you use ceramic stones?

    Thread Starter: george wilson

    Maybe I got lucky. My flattening of the White stone took about an hour,using a used diamond stone. It was slightly out of flat,and had a fuzzy spot of ceramic that had to go. I have seen pictures of "sawn" looking ceramic stones by Spyderco(my brand),but haven't encountered one personally. I got...

    Last Post By: Reinis Kanders Today, 2:48 PM Go to last post
    Christopher Charles

    Is the Klausz-Frid-Scand Bench Dead?

    Thread Starter: Christopher Charles

    Hello all, Someone noted that everybody loves a thread on building a bench (just like you can't have too many clamps?). I'm planning to migrate this thread to SMC: http:// forums.finewoodworking.com/fi...and-bench-dead (Remove the space after // when copying into your browser.) I'll...

    Last Post By: Christopher Charles Today, 11:27 AM Go to last post
    Rich Engelhardt

    Freehand curve cut on a tablesaw?

    Thread Starter: Rich Engelhardt

    http://www.thisoldhouse.com/toh/video/0,,20924478,00.html Tom Silva's using the table saw to freehand cut @ 57 seconds into the video. I'd think this is a good way to be force fed a piece of material - - but - - this is TOH & Tom Silva.....:confused::confused:

    Last Post By: John Blazy Today, 9:55 AM Go to last post
    Stanley Covington

    Part Deux - The Gennou BTS

    Thread Starter: Stanley Covington

    I am starting a new thread because I need to add a significant amount of new information to my older gennou thread, but if I just appended the old thread, most people would just blow it off as more chitchat. So here goes. History We all grew up using hammers with handles designed to fit a...

    Last Post By: Stanley Covington Yesterday, 8:02 PM Go to last post
    Allan Speers

    Chipmunks! How to get rid of them?

    Thread Starter: Allan Speers

    Long story short: We have a HUUUGE family of chipmunks that now live all around our house. I guess it keeps them safe from predators. They aren't cute anymore, causing a lot of damage to the lawn, shrubs, etc. Ca anyone suggest the "best" way of eliminating them? I don't care about keeping...

    Last Post By: Allan Speers Yesterday, 5:37 PM Go to last post
  • Mike Cruz

    There is no available content written by Mike Cruz