Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: Warren Lake Yesterday, 12:35 PMFor those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...
Last Post By: Michael Burnside Yesterday, 1:15 PMMy doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...
Last Post By: Michael Weber Today, 11:07 AMI will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....
Last Post By: Curt Harms Today, 9:52 AMhas anyone done a cope and stick micro/skinny shaker setup, or is the consensus that it's always a miter wrap? i talked to Great Lakes a while back, and they hadn't seen it (or at least my rep hadn't), curious what others have done. i would much, much rather make them on the shaper than at the...
Last Post By: Maurice Mcmurry Yesterday, 7:17 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 50)
Thanks Jamie, however I'd prefer to use either hard oil or Rubio on this project.
Mark Gibney Today, 12:03 PMThat gap in the stanley chisel and others I have. When I grasp it, the rim of the socket digs into the skin of my palm when I tighten my grip while malleting.
Rafael Herrera Today, 11:57 AMThat may however, be a symptom of the problem of the iron tending to not stay in place, leading to overtightening.
I would bend it back with
The problem was in the wiring connecting the power suply to the laser tube. ( Black and Red wires where damaged after 22 years of movements).
Nice!
It may be kind of small, but doing so avoids the one major drawback I find with many standard Roubo style benches. It puts the leg
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 1:36 AM