Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: James White Today, 8:57 AMI had the high bid tonight on this Rockwell/Delta 28-350. I've been looking for and bidding on these for the last few years, and I was the back bidder a few times, but this one went for a very good price. My reserve bid was $600. It's possible that there's something terribly wrong with it, but...
Last Post By: Jim Becker Today, 9:43 AMI will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....
Last Post By: Malcolm Schweizer Today, 10:37 AMA few weeks ago, the mowing season began here. While in the shed, I was looking for something and checking the open containers on the bench in there and I noticed a right-angle adapter. Looking at it, I couldn't figure what it fit. I put it back into the container and continued the search for...
Last Post By: Cameron Wood Yesterday, 12:24 PMI looked at Sawmill Creek threads from 2020 until now. I figured that tool costs, availability and opinions change after 4 or more years. Over that time, there were favorable comments about Festool, Bosch and Mirka. My typical use is flat surfaces on cabinet faces and panels, not many edges...
Last Post By: George Yetka Yesterday, 3:07 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 9)
Maybe. Depends on the person and the tool. (Votes: 49)
I've used Red Oak with Rubio Monocoat mint pre-color followed by Rubio Cotton White to look like White Oak. It went quite well actually. The mint removes
Michael Burnside Today, 10:55 AMI'm curious what the 07 profile is used for?
andrew whicker Today, 10:54 AMI would like to buy some fingers for an Akeda dovetail jig. Especially through dovetail number 9 and universal tail guides. Please, please, let me know
Gary Riecke Today, 10:48 AM**** UPDATE ***** There was a problem- Grizzly did respond and sent parts.
I waited to do this update, because I wanted to give Grizzly
The real Norton is a scam as it loads almost as much cr** as Microsoft Windows
Jerome Stanek Today, 10:21 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 6:36 PM