Sawmill Creek Woodworkers Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

Chinese laser purchase/Shenui/Laserworks tips and tricks thread
Thread Starter: Rodne Gold
Considering a lot of us are going or have gone that direction , I thought it a good idea to combine our knowledge pool in one thread. So I have started one. Those of you that have already posted to other threads can perhaps repeat and consolidate the posts here or at least point to other posts on...
Last Post By: George Carlson Yesterday, 9:07 AM

Your Best Nifty Shop Tip?
Thread Starter: Russell Neyman
It's the small things that often make the biggest difference. I've found that the crafty veterans seem to know a little trick here or there that make turning better, safer, faster, or easier. So I'm throwing out a challenge: give us your best "nifty" and when this thread is done, it will make a...
Last Post By: Rich Stewart Yesterday, 11:48 AM

Sharpening technique--removing the wire edge
Thread Starter: Steve Voigt
Hi all, This post may portray me as embarrassingly stupid and inefficient, but whatever. Here goes. For the last 15 years, regardless of the sharpening media, I have used the following method: 1) hone a secondary bevel on a coarse stone until I can feel the wire edge on the back, all the way...
Last Post By: george wilson Yesterday, 3:19 PM

Laser Engraving True 8bit Shades of Grey
Thread Starter: Jeff Woodcock
Hi everyone, I'm new here and this is my first thread and post on this forum. I would like to introduce to everyone a new process me and my son developed to laser engrave true 8bit shades of grey using a 445nm laser diode. There is no dithering a image first, no pulsing or overlapping dots to...
Last Post By: John Champlain Yesterday, 11:58 AM

Lie Nielsen new waterstones
Thread Starter: Dave Cav
If didn't have a good set of Shapton pro stones I'd be looking at these. The combo stones appear to be a pretty good deal. http://www.lie-nielsen.com/catalog.php?sku=2-OHISHII
Last Post By: David Weaver Yesterday, 12:18 PM

A Scientist Explains The Physics of Resawing
Thread Starter: Julie Moriarty
I don't know he's a scientist...:rolleyes:
Last Post By: Eddie Darby Yesterday, 7:10 PM

Christian Castillo

There is no available content written by Christian Castillo

Recent Polls
Please Select The Bailey Box Contest Winner (148 Votes)

Bill Wyko (84 Votes)

Craig Matheny (6 Votes)

Dick Bipes (33 Votes)

Hayes Rutherford (12 Votes)

Jacques Malan (3 Votes)

Kathy Marshall (3 Votes)

Matt Mitman (7 Votes)
Recent Forum Posts

Wearing out waterstones...

I've made a few wooden bases for stones, but never had to apply epoxy. Instead, I excavated shallow cavities to hold the stones.
Jack Curtis Today, 1:09 AM

Laser Cut Kerf Gauge

I guess cutting out a 1" square and then measuring it is too simple...
Lee DeRaud Today, 1:06 AM

Bryd head on DJ-20 Jointer

Will the Delta DJ-20 with the factory 1 1/2 Hp motor be enough to face joint figured maple without stalling the machine??? The Grizzly 490 has a 3 Hp
joe maday Today, 1:03 AM

Another Pedestal Basket

Richard,

Many thanks for the info..........not sure I have the patience or skills for this kind of work ..... however it sure is inspiring
Dick Mahany Today, 12:29 AM

Laser Cut Kerf Gauge

Pretty cool:

http://www.thingiverse.com/thing:84621

l8r,

Jimmy
Jimmy Phillips Today, 12:25 AM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Christian Castillo

Recent Polls

Recent Forum Posts

Recent Blog Posts