Sawmill Creek Woodworkers Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

Chinese laser purchase/Shenui/Laserworks tips and tricks thread
Thread Starter: Rodne Gold
Considering a lot of us are going or have gone that direction , I thought it a good idea to combine our knowledge pool in one thread. So I have started one. Those of you that have already posted to other threads can perhaps repeat and consolidate the posts here or at least point to other posts on...
Last Post By: George Carlson Today, 9:07 AM

Your Best Nifty Shop Tip?
Thread Starter: Russell Neyman
It's the small things that often make the biggest difference. I've found that the crafty veterans seem to know a little trick here or there that make turning better, safer, faster, or easier. So I'm throwing out a challenge: give us your best "nifty" and when this thread is done, it will make a...
Last Post By: Rich Stewart Today, 11:48 AM

Sharpening technique--removing the wire edge
Thread Starter: Steve Voigt
Hi all, This post may portray me as embarrassingly stupid and inefficient, but whatever. Here goes. For the last 15 years, regardless of the sharpening media, I have used the following method: 1) hone a secondary bevel on a coarse stone until I can feel the wire edge on the back, all the way...
Last Post By: george wilson Today, 3:19 PM

Laser Engraving True 8bit Shades of Grey
Thread Starter: Jeff Woodcock
Hi everyone, I'm new here and this is my first thread and post on this forum. I would like to introduce to everyone a new process me and my son developed to laser engrave true 8bit shades of grey using a 445nm laser diode. There is no dithering a image first, no pulsing or overlapping dots to...
Last Post By: John Champlain Today, 11:58 AM

Lie Nielsen new waterstones
Thread Starter: Dave Cav
If didn't have a good set of Shapton pro stones I'd be looking at these. The combo stones appear to be a pretty good deal. http://www.lie-nielsen.com/catalog.php?sku=2-OHISHII
Last Post By: David Weaver Today, 12:18 PM

A Scientist Explains The Physics of Resawing
Thread Starter: Julie Moriarty
I don't know he's a scientist...:rolleyes:
Last Post By: Eddie Darby Today, 7:10 PM

Alan Lightstone

There is no available content written by Alan Lightstone

Recent Polls
Please Select The Bailey Box Contest Winner (148 Votes)

Bill Wyko (84 Votes)

Craig Matheny (6 Votes)

Dick Bipes (33 Votes)

Hayes Rutherford (12 Votes)

Jacques Malan (3 Votes)

Kathy Marshall (3 Votes)

Matt Mitman (7 Votes)
Recent Forum Posts

Leaf ID #5

Doug, this is a good one for the US. "The Book Of Trees" by William Carey Grimm. Check with your county agent or state forest service also.
robert baccus Today, 11:44 PM

Need Help with Dust Collection For Garage Shop

I started using 2 car garage as a shop and almost immediately had to build a downdraft sanding station because I was doing a lot of sanding. Then I added
Bob Grier Today, 11:40 PM

Fluting / Incising Jig

Thanks Dick. That should do the trick. There is just so much you can do with it and hopefully we get to see some of that beautiful work of yours. It looks
John Terefenko Today, 11:39 PM

Finding studs behind plaster and lath

First, see what you can surmise from the existing structure such as heating vents. With the grill off you can often see and poke around with a wire and
Peter J Lee Today, 11:37 PM

Rabbet block plane vs Shoulder Plane

I'm another shoulder plane guy. I have a LV Medium and use it all the time and will get a LV Large when I can convince myself to spend the money. I
Dave Cav Today, 11:35 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Alan Lightstone

Recent Polls

Recent Forum Posts

Recent Blog Posts