• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Rodne Gold

    Chinese laser purchase/Shenui/Laserworks tips and tricks thread

    Thread Starter: Rodne Gold

    Considering a lot of us are going or have gone that direction , I thought it a good idea to combine our knowledge pool in one thread. So I have started one. Those of you that have already posted to other threads can perhaps repeat and consolidate the posts here or at least point to other posts on...

    Last Post By: joseph shawa Today, 4:03 PM Go to last post
    David Falkner

    2nd Build (first) - CNC Router

    Thread Starter: David Falkner

    Building my 2nd CNC first, I hope. I have been researching for over a year, read a thousand threads and articles, and am hopefully building my 'second machine' for my first. There is still a ton to learn and that process will probably never stop. Of this I am certain, I will be in new territory...

    Last Post By: Mike Heidrick Today, 5:23 PM Go to last post
    Derek Cohen

    Bench chisel handles

    Thread Starter: Derek Cohen

    I couldn't resist the opportunity that Steve presented a day or so ago, when he posted pictures of chisels made by Larry Williams and Don McConnell. We had been discussing the ergonomics of mortice chisels, when these bench chisel handles popped up. Rather than sidetrack the discussion, I thought a...

    Last Post By: david charlesworth Today, 3:57 PM Go to last post
    Stew Hagerty

    Well I Took The Plunge

    Thread Starter: Stew Hagerty

    Plunging as in making mortises with the Domino I just ordered. Yup, I ordered the standard size along with the systainer full of beech dominoes. I have a nice Powermatic Hollow Chisel Mortiser, which I will use for larger joints so that's why I opted for the smaller model. I am anxious now to...

    Last Post By: Erik Christensen Today, 2:57 PM Go to last post
    Ken Fitzgerald

    Credit Card fraud....

    Thread Starter: Ken Fitzgerald

    Our daughter works in the accounting department's revenue division for one of the major airlines. She has to deal daily with credit card fraud as it pertains to that business where she interfaces between the company and the issuing banks. In conversation this morning she told me how the two...

    Last Post By: Brian Elfert Today, 5:29 PM Go to last post
    Mark Gibney

    Would 2 jointers be useful? or excessive?

    Thread Starter: Mark Gibney

    I'm milling a bunch of cherry for a job. My 16" jointer with straight knives works fine for flattening one side before the boards go to the planer, but not so great for truing an edge. The reason is the blades are getting dull. Well, it takes me so long to change out the knives I just can't take...

    Last Post By: Chris Fournier Today, 10:17 AM Go to last post
  • Russell Neyman

    There is no available content written by Russell Neyman