Considering a lot of us are going or have gone that direction , I thought it a good idea to combine our knowledge pool in one thread. So I have started one. Those of you that have already posted to other threads can perhaps repeat and consolidate the posts here or at least point to other posts on...
I knew from the start that getting into woodworking was going to be a very expensive hobby. And even more so when I took up turning. I recently bought a whole lathe setup with a wolverine jig and grinding wheel. The fellow who I bought it from had 2 oneway blue 8" grinding wheels in 54 and 120...
Ok, we need some pictures. While many of you will be using lasers my friend Paul has a Chevalet. This tool was created in the late 1700's for production marquetry. It has a foot activated clamp to hold your stack of veneers and a "D" shaped saw that is held perpendicular to your cut but will move...
I have come the conclusion that I need to upgrade to a cyclone with 3hp min size. I am looking at Onieda V3000, Grizzly G0441, and Penn State 3.5hp. The cost differences are not that mush with Penn State being lowest.
I would like to know people's opinions about the pros & cons of these suppliers....
Hi, Creekers,
Back for another drum project. This one's gonna be big. And, it will take a while.
Pterocarpus is the genus for the market name of padauk, and Pterocarpus Rex is a play on T Rex.
This is a collaboration with a guy who will finish, drill and deliver the drums to his own...
Unleaded went from $3.79 this morning to $4.09 in a matter of minutes. 30 cents is quite a hike, cant tell me the gas stations aren't smiling for a couple days.
Genuine ( Honduran as Cuban is no more) is used for exterior but the others, Luan, Meranti, Brazilian used for flooring, and African, are not great for
I'd use it in the absence of something more appropriate to outdoors (presuming it's not genuine mahogany) - like cedar. Even if it's mahogany, it's still
Sections
Recent Articles
Recent Article Comments Widget
Recent Polls
Recent Blog Posts
Chinese laser purchase/Shenui/Laserworks tips and tricks thread
Thread Starter: Rodne GoldConsidering a lot of us are going or have gone that direction , I thought it a good idea to combine our knowledge pool in one thread. So I have started one. Those of you that have already posted to other threads can perhaps repeat and consolidate the posts here or at least point to other posts on...
Last Post By: George Carlson Yesterday, 7:32 PM