Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

Are your tools dangerous?

Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...

How much does a shop build add to property value?

For those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...

My new bandsaw, I hope...

I had the high bid tonight on this Rockwell/Delta 28-350. I've been looking for and bidding on these for the last few years, and I was the back bidder a few times, but this one went for a very good price. My reserve bid was $600. It's possible that there's something terribly wrong with it, but...

Major upgrade- Grizzly 24” bandsaw has arrived

I will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....

Random Orbital Sanders (again)

I looked at Sawmill Creek threads from 2020 until now. I figured that tool costs, availability and opinions change after 4 or more years. Over that time, there were favorable comments about Festool, Bosch and Mirka. My typical use is flat surfaces on cabinet faces and panels, not many edges...

Major upgrade- Grizzly 24” bandsaw has arrived

I am probably at minimum CFM for this saw with a 1.5 HP dust collector, but the gap where the dust collection is was a big difference in dust collection

My Workshop _ Just Keep Swimming

My assy table grew in length a bit for a project.. pretty ugly and unfortunately has a dip that I need to fix down the road...

Advice needed on cutting/stickering downed tree

Bill...Seems to me wet wood might stick to the inside of pipes or impellers, like it does to the bandsaw and blade.

John...Since you have

Veritas scrub plane issue

OP coming back. Apologies for radio silence. Just coming out of an 8-hour power outage ... another regular feature of my location. I'll take some

Spalted Ash

Thanks to all for this quick and excellent advice!

Bob

SC Pig-Picking