Curt Harms
Contributor

That's the reason for making the holes slightly over sized.

One of the things Pennsylvania has done well - and there aren't a lot - is design a web site for handling motor vehicle matters. I'd spend a few...

Great idea. Handling full sheets of 3/4" ply is one of the most difficult tasks for solo woodworkers, 3/4" MDF has to be worse.

Mike, I'm sure those shiny marks were the result of something besides a dishonest shop:rolleyes:. There used to be a shop(s) that only did...

The first option would be my choice I think. Remove the door bell, cut and shape a triangular piece of wood. Mount the door bell to the triangular...

I've used 3/8" acrylic for sub bases in the past. I wanted the sub base to accommodate Porter Cable style bushings and 1/4" thick material didn't...

I'm curious about that as well. I'd probably call Sawstop and see if their vaunted customer service reputation is justified.

Avgas at airports is nearly always 100LL (100 octane low lead) That doesn't have alcohol but it does have a fair bit of lead in spite of its low lead...

Re board length a rule of thumb I've seen says board length= total jointer bed times 1.5. I have done twice the jointer beds but wouldn't want to go...

What I've read about 4K is that it makes a difference on larger displays, generally 50" and up. There is another technology called High Dynamic Range...

I recall reading that at room temperature, Titebond I will reach 80% of full strength in two hours.

You could use the existing sub base to make a sub base to suit your purposes. I've done it for Porter Cable routers so no help with Triton. It took 2...

I would personally be more concerned about electrical screwups than plumbing screwups. I can't think of a plumbing problem that would result in a...

It looks like there are docking stations available for the Dell 5580 you're looking at if you want to leave your keyboard and mouse plugged in. You...

The primary reason I bought a Jet JJP-12 jointer/planer was for the wide jointer. I can get rough sawn air dried hardwood for very attractive prices....

I don't know about wood to wood joints but when I did some solid surface work I used hot melt glue to fasten clamping blocks to the solid surface...

Targeted advertising had made Google many billions of dollars and has severely damaged print media advertising. Remember the Sunday editions of the...

I agree with those that say don't try to feed full sheets. Commercial shops may feed large sheets but they likely have extra support to the side and...

That was my first thought but coveralls might be too hot during the summer in warmer areas.

Did HV Tools not set mlcswoodworking.com to forward to HVtools.com? When I type mlcswoodworking.com the request seems to disappear. When I type...

Little O.T. but I believe Comcast is building their own mobile infrastructure for at least part of their system that is now using Verizon. Comcast is...

There may be another advantage to 3 phase if you hate working on machines. When you hear about troubles with single phase electric motors there are...

The trick with blood sugar is that it requires some sort of needle or probe sticking through one's skin. If there were a reliable sugar sensing...

There is a company that will make a fabric filter to your specification. I had a 1 h.p. dust collector with the usual bag filters. They would get...

There's another trick I read about and used. I don't exactly remember the sequence, it's been a while. I think I started a print job, unplugged the...

I mostly use Firefox with uBlock origin and noscript. Noscript in particular is very powerful and can work too well, some web pages have significant...

Same here, but my automotive coverage went down upon changing companies. Homeowner's went up less than 10%. Both vehicles are 20 years old so it...