Warren Lake
Contributor

and I thought id catch hell for doing walk abouts on my bandsaw table :)

have seen Norton, Have seen Bell and sent it to them. Calls from Amazon and Rev Can and and. each time nice name and sounding like Peter Sellers in...

I liked how it was and is again as you have some number of other you tubes on the screen same time, six or seven from memory.

This was a ceiling done to stop sound transmission. It worked very well. Number of layers of drywall with roxul compressed between with acoustic...

Had a recording studio when young, you can take it as far as you want, floating concrete floors on springs Separate 2 x 6 walls on each slab that...

walked on one of the bandsaw tables many times to reach up to get things on the wall. Have to stop doing that and will.

so we really do have the power to change the world.

looks like the switched it back.

I cant work in shorts in the shop or landscape, get beat up. Kneeling at times as well.

any new router is a smooth machine compared to ones that have worked hard. My Makita plunge 3Hp started out tight and became a rattle trap. Not the...

seems Bills answer is what happened. Looks like im not the only one not impressed. Just had a friend pissed with technology on his apple stuff and...

those machines are amazing Mark. Fast and clean. I guess the bottom left has a bit of a round to it which is fine. Derek here is what you were...

Up to yesterday the title was below the you tube and all other you tubes were down the right side. Whatever I must have hit now puts the title on...

I used a General drill press with attachment for a while. We didnt have the benefit of Jack who showed why chisels need attention over how they...

had to do mortises with a drill press at first. 1/2" mortises in birdseye pushing back. Not ideal but the work got done. The chain on the...

finishing nails, snip them off close, push your two parts together.

mine can with high speed steel. I changed them out for the insert carbide reversible right at the start so never even got used to the stock ones. ...

are those the stock knives like on the older ones or replaceable insert ones? had an 1100 for a long time came with their style and changed them out...

we machined Corion on a bridgeport it work very well. I used tons of high speed end mills in a makita router. 1 1/2 2" and even 3 cutting but that...

machined tons of 1/4" past that had to be reglued back onto solid where it came from and was barely over length so that meant no snipe possible. ...

used all kinds of cleaners. on the side here just wd40, on the head used lacquer reducer. Ive used purple automotive cleaner as you can mix any...

rotos are not all equal my 10 would start that with no issue and its not even the heaviest one of the three then they sold, one more hocus pocus...

read my mind. 30 other machines as well. They made machines for the trade and then later consumer and designer hobby stuff. Hobby people spend...

besides that is the joy of using a machine that has weight. The general jointer worked fine and still does but why use when a heavy smooth machine is...

Hi thanks bill will pass it on to tech guy and yeah im not. going out to trim trees now I do lots of stuff but computers past I put time and...

while not so practical at one point I doubled up on tools and machines. This because I had a general planer that let me down several times when on...

there are two buttons on the side of the mouse and that is why i use that model. In 7 you open your photos and clic those buttons and back from the...

the black original stuff different on both Makita and Porter cable got scratches with use as well. I never focused or looked close but easy enough...