Sal Giambruno
Member

If you use Aspire 11.5x or greater, I can send you the files. PM me your email. You'll just need to change your post processor and tweak for your...

Jimmy Diresta's latest video project is a nice exercise in metalwork, including some things he's not done previously. Two metal shop stools.

Sadly, three panels...so one complete cabinet and one half. But the recovery worked just fine and I slapped myself up-side my head to insure I don't...

David, if you do a ton of narrow component sanding, then yes, the smaller 125mm/5" format is going to be easier to keep things flat. But in general,...

Wow...nice haul on that lumber, Rod! I've be coveting those wide boards for sure. :) I actually spent quite a bit of time in the shop this past...

There is also the aspect of actually physically and safely moving that weight through the cut (sled required for safety on something like this) and...

I don't believe that there have been many changes at all to the venerable S45 over the years and it's still made today, AFAIK. It's the one bandsaw...

I've thought about that a few times, but ultimately decided that this is my hobby "now" so it's not worth worrying about it. My one compromise is...

Tesla eventually "closed" their offer and started requiring their own solar roof or panels, if I'm not mistaken, in order to buy the PowerWall...

For metalworking (and some interesting woodworking) Pask Makes is a good channel.

Just one thing...the 9 hole pattern with a center hole (for better dust extraction) that Festool uses isn't really "proprietary" and all the major...

It would be highly unusual for me to need to borrow a tool from someone else since in my very small circle, I'm the one with the tools. I have...

Yea, my labels have gotten "more detailed"... 'cause remembering is harder. LOL

There are already two existing threads on the Graco Ultra Quickshot. The answer to your question is yes, you can shoot clears just fine with the...

Many dealers tag on "Documentation Fees" these days and that's beyond the fees for the registration, etc. They are essentially profit boosters. You...

As noted, the fix worked fine. For a few holes that magically were not fully filled with the resin (likely migrated into the plywood), a little hot...

I hesitate to comment because I'm not an expert, but I seem to recall that folks who are very familiar with the NEC have previously posted that there...

Outstanding!!!!! I hope that some good referrals come from that, too.

Thanks for posting the photos. Click the icon for "Theater Mode" at the bottom, right of the video you are playing to remove the stuff to the right...

Generac actually has an excellent battery backup solution...I considered it for here (along with solar panels), but in the end, I decided we would...

Mike, to use an existing circular saw with the same kind of track that most "track saws use", you'll need some form of adapter like Richard mentions....

Alan, how would a traditional fossil fuel generator be handled in this situation where you have solar as you describe with the draconian prohibition...

That bites, Wes. I'm sure you had some "kind words" for the tooling manufacturer!!! ------ The resin fix worked out just fine. I did need to...

They were equally good when I called with a question about my G700 after I bought and received it.

AFAIK, you absolutely can do this. Mills cut wood just fine. Just keep in mind that they are not designed to be "speedy" because their main focus is...

It's on my vehicle's published maintenance schedule at 30K intervals and yes, I get it performed. Brake fluid does tend to absorb moisture, so that...

Not surprising...there may be something chemically amiss between the PVA and the dye. (My new entry in the list of "my favorite things" is the...

Alan, even though you seem to have solved the issue at this point, it might still be an interesting and good exercise to find out if there are any...

The 32mm system holes for drawer slides need to be at 5mm to support the special low-profile screws. The tool's "business end" is 5mm, but this...