No Recent Activity

7 Visitor Messages

  1. Hi Larry-The weight capacity of the Legend EXT is dependent on the vintage. If the system was manufactured prior to about mid 06' then the driving weight limit with table skin in place on top of the vector grid is about 30-35lbs. Holding weight is about 60lbs.

    For systems manufactured after about mid 06' (with the thicker task plate) then driving weight is about 60lbs and supporting weight is closer to 100lbs.

    In all cases, if you're planning on engraving heavy objects make sure the task plate or thick engraving plate is in place and try to guesstimate the focus point so that you don't have to drive the table up or down so much.

    HTH,
    Peck Sidara
  2. View Conversation
    Peck:
    Question. Would you know what the weight capacity of a EXT36 is? Thanks Larry
  3. Dear Herzl,

    I just sent you a PM as my response was longer than the 1000 character limit. Please review and let me know if you have any additional questions.

    Peck Sidara
    Epilog Laser
  4. View Conversation
    I like to share a mallfunction in my laser tube
    There was no laser output
    Both epilog and coherent told me that the tube G50 is obsolete!!
    The laser machine is dead
    With no other choise left i disassembled the tube and was luky to find 2 bured capacitors - after replacment the machine refunctioned for some days and mallfunctioned again
    this time i did find any bured part
    I reassembeld the unit again and just of a sudden it functionagain for very short while
    Now it is not operate any more

    Any idea what can be done?
    Do you have a G50 tube for sell?
    Can any one handle this?
    Can I install another/similar laser tube?

    Thanks

    Rotem
  5. View Conversation
    hi
    i hav epilog lagend 32 80 watt i looking adout tube if you can halp mi
  6. Thanks Sal. As much as I'd like to take credit, I had no involvement. I've been in and out of the office the last couple weeks. Our awesome tech support group and Mr. Randy Allen of Engraving Concepts deserve all the credit. I'm glad everything worked out.

    Peck Sidara
    Epilog Laser
  7. View Conversation
    Peck, I have a feeling you had something to do with solving my problem. I want to thank you for what you did. That tube is very expensive. Thanks again for all the support.
    Sal Shepherd
Showing Visitor Messages 1 to 7 of 7
About Peck Sidara

Basic Information

About Peck Sidara
Location:
Golden, CO.

Signature


Peck Sidara
Epilog Laser
888.437.4564 ext. 236

Statistics


Total Posts
Total Posts
411
Posts Per Day
0.09
Visitor Messages
Total Messages
7
Most Recent Message
06-21-2010 5:23 PM
General Information
Last Activity
11-27-2013 1:41 PM
Join Date
02-25-2005
Home Page
http://www.epiloglaser.com

1 Friend

  1. herzl rotem herzl rotem is offline

    Member

    herzl rotem
Showing Friends 1 to 1 of 1