Curtis, I don't know if I have any pictures. After Christmas, I'll take a look, and I'll take some if I don't have any. I can tell you that instead of a plywood carcasse, I made frames from Poplar for anything that wouldn't show. I used plywood for the pieces that show on the inside of the door, but everything else was a frame put togehter with pocket screws. For the drawer dividers, I rabetted the frames and added 1/4 ply to keep stuff from poking up into the bottom of the drawer above. Not only was this less expensive than using 3/4 plywood throughout, but it is a lot lighter. That's a heavy piece as it is!