Rob Diz
Member

You are correct on the plate size. Unfortunately this lift won't fit in my Promax extension. Bummer.

Thanks for the info. Let me check the size plate I need.

BTW, was there a real difference between the "32" and the "V2"?

Hello Rob.
I am a tool geek and just have too many! I recently purchased the PRL-V2 and also have the QuickLift. The PRL-32 has been just sitting in a box for 2 years now. Strictly hobby usage in my home shop. Not sure exactly when I bought it - early 2005 I believe. I sent it in to Woodpeckers in 2006 as the lift mechanism was getting stiff and they "reconditioned" / cleaned it and it has not been used since. It is the standard Woodpecker plate size - 9 1/4" by 11 3/4". Info - http://www.woodpeck.com/precisionrouterlift.html.

I know some Benchdog tables are 8 1/4" by 11 3/4".

If you want some higher resolution pictures, I can take some and email to you.

Pete Kuhlman

Hello Rob.
I ama tool geek and just have too many! I recently purchased the PRL-V2 and also have the QuickLift. The PRL-32 has been just sitting in a box for 2 years now. Strictly hobby usage in my home shop. Not sure exactly when I bought it - early 2005 I believe. I sent it in to Woodpeckers in 2006 as the lift mechanism was getting stiff and they "reconditioned" / cleaned it and it has not been used since. It is the standard Woodpecker plate size - 9 1/4" by 11 3/4". Info - http://www.woodpeck.com/precisionrouterlift.html.

I know some Benchdog tables are 8 1/4" by 11 3/4".

If you want some higher resolution pictures, I can take some and email to you.

Pete Kuhlman