We had a fabricator where I used to work that was very skilled at doing this. You have to be very careful not to warp the shaft. He would run a bead...
Sadly, three panels...so one complete cabinet and one half. But the recovery worked just fine and I slapped myself up-side my head to insure I don't...
David, if you do a ton of narrow component sanding, then yes, the smaller 125mm/5" format is going to be easier to keep things flat. But in general,...
I was told the "documentation fee" came about after 9/11. Has to do with dealer retaining documentation of the sale because of the Homeland Security...