Need Advice on choice of material for cutting

Hi everyone.

I have a customer that wants me to make some folding screens (room dividers) with cut out patterns to allow light to transmit through. She wants to have a vellum like material sandwiched in between 2 layers of material. She would like the outside finish on both sides to be wood veneer.

Since the panels will be laminated I would like to use 1/8 - 3/16" material.

What is the best material to use? Someone suggested MDF. I was thinking Plywood. Is there a difference in plywoods? Also if you have a source, that would be great.

The screens will be 6' tall including the legs so the panels will be about 66" tall.

here is a sample of the design
http://www.marknolldesigns.com/image...n001smalla.jpg

Any help is greatly appreciated.

Thanks

Mark

It would be helpful if you posted the design. Also what thickness do you want the panel to be?

Added the thickness and link to the design

Thanks