Mounting Delta Splitter on Contractors Saw
Hello all. I just received my Splitter ($30.00 one) from Delta or the Dewalt Service center for the Delta Contractors saw. I need advise from those that have done this operation, Isee how the splitter is assembled, however I don't understand how the splitter mounting bracket is to be mounted in side the saw. The photos show it being mounted on a unisaw not the contractors saw. I don't see how the mounting holes on the bracket will work with the saw, but maybe i am just not getting the whole picture here. Do any of the parts on the original splitter mounting get removed? BTW, do you consider a contractors saw a right tilt saw or left tilt?
Corey
Splitter on delta contractor saw.
Problem. When I mount the bracket for the splitter into the two wholes in the trunion, the splitter is tilted to the right ; it is at 84 degrees, not 90 degrees.
The screw holes do not line up vertically. Is this a mfg. fault or does it mean that the trunion is out of adjustment?
George Cooper