So if I buy a "Mill bastard file with a smooth cut", just exactly what kind of file do I get?
Printable View
So if I buy a "Mill bastard file with a smooth cut", just exactly what kind of file do I get?
I always thought "bastard" was just the way the teeth were cut, ( single opposing diagonal lines on each side ) but these guys are saying bastard is actually a coarser cutting file.
http://en.wikipedia.org/wiki/Bastard_file
Likely your second theory Jason :)
You get whatever the marketing folks want to give you.
Except for "file", none of those terms are defined by any standards group, SAE, NIST, etc.
Mike
Here ya go, John:
http://www.evenfallstudios.com/woodw...iling_2006.pdf
see p. 6 in particular
The way I was taught, that would be an old file that was worn down that once was rough but now is smooth.Quote:
"Mill bastard file with a smooth cut"
jtk
I like the way this is going
Perhaps it's a well-worn bastard.