I have a Craftsman 10" MS that was fine for the first couple of years. Now, the two sections of fence are out of alignment with each other. Because they are connected by the center piece, I can realign the fence as a whole, but not one side with the other. There is about a three degree error between the two sides.
Sears says the problem was cause by storage in an unheated shop that caused the fence to bend from shrinking and expanding due to seasonal changes. Has anyone ever heard of this or experienced a similar problem?
I can buy a replacement from Sears, but expect that the same problem will occur again if it's caused by seasonal heating and cooling. Any comments or suggestions will be appreciated. :confused: