4 Attachment(s)
Making the bell ornaments
These ornaments are easy enough that even I can do them with my 4th grade math skills. First you take two pieces of wood approx 12" x 3" x 3/4". The length is a little extra but I don't like getting my fingers too close to the saw blade to it gives you a little to hold on to. The other dimensions can vary so long as both are the same. Then you need a 12" x 3" piece of 1/8" thick birch plywood. Just glue the plywood between them like a sandwich and let it dry.Attachment 208567
Then you set your miter saw (or table saw with sled) to 30 degrees, cut the very end off the glue up, flip it over 180 degrees and cut the first segment. Just repeat that until you have 6 segments.Attachment 208569Attachment 208568Attachment 208570
to be continued.....