I am considering getting this saw and was wondering if the Bies fence that I have will work with the rails/tubes it comes with or do I need to get them separately.
Thanks
Orlando
Printable View
I am considering getting this saw and was wondering if the Bies fence that I have will work with the rails/tubes it comes with or do I need to get them separately.
Thanks
Orlando
Orlando - It looks to me that the front rail tube on the 22116 is square with less depth than the fence tube on the Biese. The Commercial Biese fence uses 2" x 3" tube stock.
Thanks Scott. I just deposited my Ridgid 3660 at the county dump after trying to get it aligned again. For some reason mine just never cooperated.
Do you know if the 22116 will accept the Biese rails, can I upgrade to the Steel City Industrial/Deluxe fence/rails, or am I pretty much stuck with what it comes with?
With some effort, just about any aftermarket fence can be made to fit just about any standard full size table saw. I'd give the stock fence a try first, you can always sell it and upgrade later if you don't like it.